Kern River Fly Fishing Forum - CFR Rod Donation Head Count

Pete

Board Moderator

"Once you do
Boo, you'll never go
plastic again"

Posts: 2737
Gender: male

CFR Rod Donation Head Count
Jun 18^th, 2012, 3:05pm

Hey, I need a head count as to who is still in on the CFR rod donation. I know several of you have had to re-think the donation due to life getting in the way, but we need to wrap up this donation. Chiaki plans on being up on the Kern sometime in August, so that would be a great time to finish this off (hint, hint). That way he can take the rods home and it saves us shipping. Sooooooo who's still in?

Chris has 3 at the house with one on the way. I have mine to take over to him so that will be at least 5. With the switch rod being done, the bench looks a little bare with only 5 builds going on. I might be able to slip in another build? After all do rod building junkies really need a reason to build? Come on, put those talents to use and build a rod. Batson RX6 blank, low budget handle and seat and bam. Some lucky CFR participant get a custom rod. Add a rod tube and you are good to go.

Besides it will get the juices flowing for your swap rod.

Straight guides and smooth finishes,
Pete

Back to top

www.renaissanceflyrods.com
http://www.renaissanceflyrods.com/blog.html

IP Logged

GaryP Platinum Member Posts: 709 Gender:	Re: CFR Rod Donation Head Count Reply #1 - Jun 18^th, 2012, 4:19pm Pete I am still waiting on the parts from Acid rod I ordered. I have the blank I just require the hard ware. It is a 2pc 3 wt that I am building for it.
Back to top	http://groups.yahoo.com/group/fresnoflyfishersforconservation The lower kings river is my nemesis!!! IP Logged

haramic Global Moderator Fun Times, Always An Adventure Posts: 2546 Gender:	Re: CFR Rod Donation Head Count Reply #2 - Jun 18^th, 2012, 5:25pm Hi Pete, I have 2 to donate. Thanks, Chiaki
Back to top	IP Logged

GaryP Platinum Member Posts: 709 Gender:	Re: CFR Rod Donation Head Count Reply #3 - Jun 30^th, 2012, 3:45pm Hey Pete, I had to go through another supplier but I will be working on the rod soon. I have some eyes and a handle coming my way for this.
Back to top	http://groups.yahoo.com/group/fresnoflyfishersforconservation The lower kings river is my nemesis!!! IP Logged

GaryP Platinum Member Posts: 709 Gender:	Re: CFR Rod Donation Head Count Reply #4 - Jul 3^rd, 2012, 7:36pm Ok Pete, My hardware showed up for this. I have one ahead of this because it is a family build then I will start on this one right away.
Back to top	http://groups.yahoo.com/group/fresnoflyfishersforconservation The lower kings river is my nemesis!!! IP Logged

Pete

Board Moderator

"Once you do
Boo, you'll never go
plastic again"

Posts: 2737
Gender: male

Re: CFR Rod Donation Head Count
Reply #5 - Jul 4^th, 2012, 1:15pm

Tsk, tsk, tsk, Gary. What kind of rod builder are you that you only have one build going at a time? A true junkie will have at least 3 builds going at once. There is nothing more fun than trying to figure out which components are going on what rod Wink

.

I know getting all your components has been an up hill battle. You made a committment to CFR and are seeing it through, thank you.

Pete

Back to top

www.renaissanceflyrods.com
http://www.renaissanceflyrods.com/blog.html

IP Logged

GaryP

Platinum Member

Posts: 709
Gender: male

Re: CFR Rod Donation Head Count
Reply #6 - Jul 4^th, 2012, 4:25pm

Quote from Pete on Jul 4^th, 2012, 1:15pm:

Tsk, tsk, tsk, Gary. What kind of rod builder are you that you only have one build going at a time? A true junkie will have at least 3 builds going at once. There is nothing more fun than trying to figure out which components are going on what rod Wink

.

I know getting all your components has been an up hill battle. You made a committment to CFR and are seeing it through, thank you.

Pete

Lets see.

I have my brothers build,
CFR
and I have the Rod Swap.

At least I made sure I put the components for one rod separate for the other rods.

Back to top

http://groups.yahoo.com/group/fresnoflyfishersforconservation

The lower kings river is my nemesis!!!

IP Logged

haramic

Global Moderator

Fun Times, Always An
Adventure

Posts: 2546
Gender: male

Re: CFR Rod Donation Head Count
Reply #7 - Jul 4^th, 2012, 4:41pm

Quote from Pete on Jul 4^th, 2012, 1:15pm:

Tsk, tsk, tsk, Gary. What kind of rod builder are you that you only have one build going at a time? A true junkie will have at least 3 builds going at once. There is nothing more fun than trying to figure out which components are going on what rod Wink

.
Pete

Pete,

1 down, 9 to go. I'm keeping track on the "Whats on your Bench" thread. I kinda have an idea of the components I have, but then I find additional stuff. I "found" the 9 ft. 4 wt. Z-Axis blank for the Heads and Tails winner. I put on silver U 24 and it's being stream tested in Montana. Next is the CFR rod. Just need to finish applying finish.

Thanks,
Chiaki

Back to top

IP Logged

Lefty Gold Member Posts: 399 Gender:	Re: CFR Rod Donation Head Count Reply #8 - Sep 10^th, 2012, 10:55pm So, Whatever happened with the rod donations? Lefty
Back to top	Paddle faster. I hear banjos. IP Logged

Pete

Board Moderator

"Once you do
Boo, you'll never go
plastic again"

Posts: 2737
Gender: male

Re: CFR Rod Donation Head Count
Reply #9 - Sep 11^th, 2012, 4:57am

Lefty,

People kept saying "I need more time". So I gave them more time. Chris still has the rods and will take care of the judging after we offically close the donation drive. One reason I am dragging my feet is to get more rods donated to CFR. Since they aren't having any events until 2013, there wasn't a rush on finishing up.

That being said, it isn't fair to the rest of you folks who got their rods in when we first ask. For that, I am sorry Sad

. I will set a final drop dead date soon. Probably shortly after the Rendezvous.

Pete

Back to top

www.renaissanceflyrods.com
http://www.renaissanceflyrods.com/blog.html

IP Logged



Join Our Email List Email: